Air Track
1. 실험 목적
1) Average versus instantaneous velocity
물체의 운동을 1차원 선형운동으로 국한시키고 매 순간 나타나는 순간속도와 변위와 경과 시간으로 구할 수 있는 평균속도를 구한다. 그리고 빗면에서 물체 운동을 시킬때 물체의 속도에 대한 관계식을 찾아보아 실험과 비교해본다.
2) Acceleration and
■ 폐용량(lung capacity)
-두 개 이상의 폐용적이 합쳐진 것.
*들숨용량(inspiratory capacity. IC)
- TV+IRV. 약3600ml
-안정시 날숨이 끝난 후 최대로 들여 마실 수 있는 공기량
*기능적잔기용량(functional residual capacity. FRC)
- ERV+RV. 약2400ml
-정상적인 일회호흡량, 숨을 내쉰 후 폐에 남아 있는 공기량
-폐의 평형용
CFD 프로그램을 이용한 Tesla valve의 simulation과 조건부 변환을 통한 관 내의 유체의 변화의 visualization
ABSTRACT
이 보고서에서는 CFD를 이용한 프로그램 CFD-GEOM을 이용하여 tesla valve 모형을 제작하여 보았고, 그 모형을 변형하여 보기도 하였다. 또한 CFD-ACE 프로그램을 사용하여 앞에서의 Tesla valve 모형
inflows from operating activity in 2009 is 489,868,592,842. Despite the fact that Korean Airlines experienced net loss in 2009, the company managed to generate a positive cash inflow from operating activities. Also, Korean Airlines shows larger amount of cash inflows from operating activities in 2009 compared to the last year’s poor performance. (The amount of cash flows from operating of Kor
A. What are the principal activities of your company?
The Group's principal activity is providing air transportation service as the Republic of Korea's national flag carrier. Other activities include providing aircraft maintenance and engineering services, and the sale of duty-free goods. It is also involved in providing in-flight meals for third parties. In addition to passenger transportati
Air
- 압력 : 10000
- 온도 : 300
- 점성도 :
- Total Boundaries : 30
- Total Volume : 2
- Total Nodes : 7128
- Total Cells : 5300
처음 유체를 Water로 하고 Air로 바꾸어 비교해보고 Air에서 온도와 압력을 변화시켜 비교해보고 Tesla Valve의 Inlet의 길이 변화와 Outlet의 면적을 변화하여 결과 값을 비교하여 본다.
2.
Fin Fouling
*팬에 의해 분해된 전체 공기흐름은 핀 관의 더러움에 상관없이 일정하게 남아있다.
*팬 분해압력은 핀 관의 더러움과 상관없이 일정하다.
*팬을 운전시키는 모터 위 에서 암페어 수는 핀 관의 더러움과 상관없이 일정하다.
-관을 더럽히는 외부물질 때문에 공기의
역 흐름이 증가함으
발효공정
발효산물 생산을 위한 발효공정의 전반적인 단계는 첫째 종균의 보존관리, 둘째 종균의 증식, 셋째 발효 전 배양단계, 넷째 발효 생산단계로 나눌 수 있다.
1단계:종균의 보존(preservation)
생산균주의 장기간에 걸친 보존은 실제적인 발효를 위해서 꼭 필요한 조처로서 균주는 일정 주기로 옮
Density of steel 7800
Poisson’s ratio 0.32
The resultant data(velocity) = 5666.7
From this formula, we could determine the modulus of elasticity,
Theoritical value of E of steel is 200GPa, error would be
Fig.1 Property of materials.
2. Considerations
We could figure out material's properties and method of finding defect of the specimen. Ultrasonic wave value was alm